integrated antenna solutions product specifcation ae020033-c picea 2.4 ghz swivel antenna product specifcation 1 features designed for 2.4 ghz applications [bluetooth?, wifi? (802.11b/g), zigbee?, wimedia? etc.] intended for snap-in mounting supplied in bulk 2 description the picea antenna is intended for use with all 2.4 ghz applications. the antenna is intended for snap-in mounting. the blade is made of a fexible material and can be rotated 360 degrees. 3 application development tools test equipment instruments access points and gateways printers ? ? ? ? ? ? ? ?
integrated antenna solutions 2 product specifcation ae020033-c picea 2.4 ghz swivel antenna contents 1 features 2 description 3 application 4 model name 3 5 general data 3 6 electrical characteristics 3 7 electrical performance 4 7.1 voltage standing wave ratio 4 7.2 3d-radiation 4 7.3 radiation patterns 4 8 antenna dimensions 5 9 antenna foot print 5 10 electrical interface 6 10.1 transmission line and matching 6 10.2 test board dimensions 6 10.3 test board matching 7 11 reliability 7 11.1 temperature and humidity 7 11.2 judgement standard 7 12 hazardous material regulation conformance 7 13 application example 8 14 packaging 9 14.1 shelf storage recommendation 9 14.2 packaging characteristics 9 14.3 bag label information 9
integrated antenna solutions 3 product specifcation ae020033-c picea 2.4 ghz swivel antenna 4 model name 20 10 b5771 - xx antenna family -swivel t echnolog y -metal drawing no . pcb thickness 01 = 0.8 mm 02 = 1.0 mm 03 = 1.2 mm 04 = 1.6 mm 05 = 1.8 mm 5 general data product name picea 2.4 ghz article no. 2010B5771-01..05 frequency 2.4-2.5 ghz polarization linear operating temperature -40 to + 85 degc impedance 50 ohm weight 3.2 gram antenna type swivel 6 electrical characteristics characteristics conditions* min typ max peak gain 4.1 dbi frequency 2.4-2.5 ghz, measured in 3d chamber ( near feld) effciency 60% vswr <2:1 frequency 2.4-2.5 ghz, measured in network analyzer *note all data provided in this table are based on the antenova reference board
integrated antenna solutions 4 product specifcation ae020033-c picea 2.4 ghz swivel antenna 7 electrical performance 7.1 voltage standing wave ratio 2.4 2.45 2.5 ghz vswr 1:1 3:1 * hp9770 network analyzer 2:1 7.2 3d-radiation -24.33 -18.89 -13.44 -7.99 -20 -20 -10 0 -10 0 -10 -5 0 5 15 20 x y z 10 20 -20 -2.54 2.9 -15 10 10 20 dbi 7.3 radiation patterns total polarization xy- plane xz- plane yz- plane -35 dbi -25 dbi -15 dbi -5 dbi 5 dbi 15 dbi 30 210 60 240 90 270 120 300 150 330 180 0 2.40 ghz 2.45 ghz 2.50 ghz y z -35 dbi -25 dbi -15 dbi - 5 dbi 5 dbi 15 dbi 30 210 60 240 90 270 120 300 150 330 180 0 2.40 ghz 2.45 ghz 2.50 ghz x z -35 dbi -25 dbi -15 dbi -5 dbi 5 dbi 15 dbi 30 210 60 240 90 270 120 300 150 330 180 0 2.40 gh z 2.45 ghz 2.50 ghz y x
integrated antenna solutions 5 product specifcation ae020033-c picea 2.4 ghz swivel antenna 8 antenna dimensions l 2 w 2 b h w f f 2 t l h 2 t 3 t 2 antenna fitted on pcb l1 l2 w1 w2 h1 h2 f1 f2 t1 t2 t3 b length length width width height height feed feed pcb thickness* 48.3 0.3 49.5 0.3 120.2 7.00.2 8.550.2 7.10.2 3.550.2 6.00.2 t10.05 2.10.2 8.00.2 14.90.2 dimensions in millimeters *pcb thickness (t) : 0.8, 1.0, 1.2, 1.6, 1.8 mm 9 antenna foot print f1 f2 f3 f4 s1 p1/p2 p3/p4 d1 d2 t t1 t2 t3 feed feed feed feed snap-in position position diam. diam. thickness* 4.00.1 6.0 0.1 2.00.1 2.250.1 12.50.1 3.250.1 3.00.1 1.8+0.1 3.1+0.1 t 3.00.1 4.50.1 max 7.2 dimensions in millimeters
integrated antenna solutions 6 product specifcation ae020033-c picea 2.4 ghz swivel antenna 10 electrical interface 10.1 transmission line and matching t ypical config . 1 t ypical config . 2 c omponent type s induc to r capacitor the matching network has to be individually designed using one, two or three components. module strip line dc bloc k c omponen t c omponen t c omponen t the schematic picture describes the radio module and the matching network.the matching network shall be designed as a pi net. the antenna acts as an active part of the device, the number and value of matching components will be unique for your application. 10.2 test board dimensions the testboard is designed for evaluation purposes for the picea 2.4 ghz. the card has the same size as a typical pcmcia card. the board is ftted with an sma connector.
integrated antenna solutions 7 product specifcation ae020033-c picea 2.4 ghz swivel antenna 10.3 test board matching shunt induc tor 1.8 nh series c onduc tor 2.8pf the testboard is matched with above specifed components. note! the component values will vary depending on size of pcb board, surrounding components etc. 11 reliability 11.1 temperature and humidity item standard low high duration operating temperature en/iec 60068-2-2, test bd: dry heat -30 degc +90 degc - temperature cycling en/iec 60068-2-14, test na: change of temperature -40 degc +90 degc 500 cycles / 10 min storage life humidity en/iec 60068-2-1, test ca: damp heat +60 degc / 90% rh 500 h storage life low temperature en/iec 60068-2-1, test ad: cold -55 degc - 500 h storage life high temperature en/iec 60068-2-2, test bb: dry heat - +125 degc 500 h 11.2 judgement standard the judgement of the above tests should be made as follows: visual inspection - normal apperance with no obvious cracking, peeling-off. electrical inspection - the dut satisfes the vswr specifcation throughout the 2.4-2.5 ghz band. 12 hazardous material regulation conformance cadmium and cadmium compound. organic brominated compound (pbb, pbde) polychlorinated biphenyl (pcb) polychlorinated naphthalene (pcn) organic tin compound asbestos azo compound lead and lead compound mercury and mercury compound sexivalent chrome compound chlorinated paraffn (cp) mirex formaldehyde tetra-bromo-bisphenol-a-bis (tbbp-a-bis) 1. 2.
integrated antenna solutions 8 product specifcation ae020033-c picea 2.4 ghz swivel antenna 13 application example 2.4 ghz module back surf ace front surf ace 1 2 3 6 7 ground plane area clearance area w t h ground strip line no crossing strip lines 4 5 fig. 1 placement of antenna the antenna shall preferably be placed at the edge of the pcb oriented as above so that the antenna blade can be placed outside the applications casing. other placements and orientations and size of grounplanes are possible, but this will affect the performance. avoid active components near the antenna. placement of 2.4 ghz module to avoid losses the module shall be placed as close to the antenna as possible. strip line the strip line must be dimensioned according to your specifc pcb. (see fg 1). no crossing strip lines are allowed between the strip line and its ground plane. via connections to avoid spurious effects, via connections must be made to analogue ground. component matching component values are depending on antenna placement, pcb dimensions and location of other components. dc block might be needed depending on rf module confguration. clearence area avoid components and parts close to the antenna. note! incorrect implementation of the antenna will affect the performance. contact antenova for implementation services. 1. 2. 3. 4. 5. 6. 7.
integrated antenna solutions 9 product specifcation ae020033-c picea 2.4 ghz swivel antenna 14 packaging 14.1 shelf storage recommendation temperature -10 to +40 degree c humidity less than 75% rh shelf life 48 months storage place away from corrosive gas and direct sunlight 14.2 packaging characteristics the antennas are delivered in bulk enclosed in plastic bags 14.3 bag label information antenova ? anteno va
integrated antenna solutions 10 product specifcation ae020033-c www.antenova.com corporate headquarters antenova ltd. far field house albert road stow-cum-quy cambridge cb9 5ar tel: +44 (0) 1223 810600 fax: +44 (0) 1223 810650 email: info@antenova.com asia headquarters antenova asia ltd. 3f, no 10, alley 6, lane 45 poa shing road hsin tien city taipe county roc 23145 tel: +886 (0) 2 2917 6536 fax: +886 (0) 2 2910 6546 email: info@antenova.com europe charlotta olander uk/eu sales manager tel: +46 702 913731 email: lotta.olander@antenova.com america david nuti na sales manager tel: +1 214 668 0357 email: david.nuti@antenova.com asia cl lim vp sales asia tel: +886 (0) 931 201 318 email: cl.lim@antenova.com sales offces
|
